diff options
Diffstat (limited to 'impl/antlr/libantlr3c-3.4/doxygen/build.dox')
| -rw-r--r-- | impl/antlr/libantlr3c-3.4/doxygen/build.dox | 207 |
1 files changed, 0 insertions, 207 deletions
diff --git a/impl/antlr/libantlr3c-3.4/doxygen/build.dox b/impl/antlr/libantlr3c-3.4/doxygen/build.dox deleted file mode 100644 index 05c3c66..0000000 --- a/impl/antlr/libantlr3c-3.4/doxygen/build.dox +++ /dev/null @@ -1,207 +0,0 @@ -/// \page build Building From Source -/// -/// The C runtime is provided in source code form only as there are too many binary -/// versions to sensibly maintain binaries on www.antlr.org. -/// -/// The runtime code is provided with .sln and .vcproj files for Visual Studio 2005 and 2008, -/// and \b configure files for building and installation on UNIX or other systems that support this tool. If your -/// system is neither Windows nor \b configure compatible, then you should find it -/// reasonable to build the code manually (see section "Building Manually".) -/// -/// \section src Source Code Organization -/// -/// The source code expands from a tar/zip file to give you the following -/// directories: -/// -/// - <b>./</b> The location of the configure script and the antlr3config.h file -/// generated by the running the configure script.This directory also -/// contains the solution and project files for visual studio 2005 and -/// 2008. -/// - <b>./src</b> The location of all the C files in the project. -/// - <b>./include</b> The location of all the header files for the project -/// - <b>./doxygen</b> The location of documentation files such as the one that generates this page -/// - Other ancillary directories used by the build or documentation process. -/// -/// \section winbuild Building for Windows -/// -/// If you are building for Cygwin, or a similar UNIX on Windows System, follow the "Building With Configure" instructions below. -/// -/// Note that the runtime is no longer compatible with the VC6 Microsoft compiler. If you absolutely need to build with -/// this compiler, you can probably hack the source code to deall with the pieces that VC6 cannot handle such as the -/// ULL suffix for constants. -/// -/// If you wish to build the binaries for Windows using Visual Studio 2005, or 2008 you may build using the IDE: -/// -# Open the C.sln file -/// -# Select batch Build from the Build menu -/// -# Select all configurations and press the build button. -/// -/// If you wish or need to build the libraries from the command line, then you must -/// use a Windows command shell configured for access to VS2005/VS2008 compilers, such as the one that is -/// started from: -/// -/// <i>Start->Microsoft Visual Studio 2005->Visual Studio Tools->Visual Studio 2005 Command Prompt</i> -/// -/// There appears to be no way to build all targets at once in a batch mode from the command line, -/// so you may build one or all of the following: -/// \verbatim - C:\antlrsrc\code\antlr\main\runtime\C> DEVENV C.sln /Build ReleaseDLL - C:\antlrsrc\code\antlr\main\runtime\C> DEVENV C.sln /Build Release - C:\antlrsrc\code\antlr\main\runtime\C> DEVENV C.sln /Build DebugDLL - C:\antlrsrc\code\antlr\main\runtime\C> DEVENV C.sln /Build Debug -\endverbatim -/// -/// After the build is complete you will find the \c.\cDLL and \c.\cLIB files under the directory containing C.sln, -/// in a subdirectory named after the /Build target. In the Release and Debug targets, you will find that there is only a \c.\cLIB archive file, -/// which you can link directly into your own projects if you wish to avoid the DLL. In \c ReleaseDLL and \c DebugDLL you will find both a -/// \c .LIB file which you should link your projects with and a DLL. The library and names on Windows are as follows: -/// -/// \verbatim - - ReleaseDLL : ANTLR3C.DLL and ANTLR3C_DLL.LIB - - DebugDLL : ANTLR3CD.DLL and ANTLR3CD_DLL.LIB - - Release : ANTLR3C.LIB - - Debug : ANTLR3CD.LIB -\endverbatim -/// -/// There currently no .msi modules or other installs built for Windows, so you must place the DLLs in a directory referenced -/// by the PATH environment variable and make the include directory available to your project configurations. -/// -/// -/// \section configure Building with configure -/// -/// Before starting, make sure that you are using a source code distribution and not the source code directly from the -/// Perforce repository. If you use the source from the perforce tree directly, you will find that there is no configure -/// script as this is generated as part of the distribution build by the maintainers. If you feel the need to build from -/// the distribution tree then you must have all the autobuild packages available on your system and can generate the -/// configure script using autoreconf. If you are not familiar with these tools, then please use the tgz files in the -/// dist subdirectory (or downloaded from the ANTLR web site). -/// -/// The source code file should be expanded in a directory of your choice (probably your working directory) using the command: -/// -/// \verbatim -gzip -dc antlrtgzname.tar.gz | tar xvf - -\endverbatim -/// -/// Where: <b>antlrtgzname.tar.gz</b> is of course the name of the tar when you downloaded it. You should find a \b configure script in the sub directory thus created. -/// -/// The configure script accepts the usual options, such as --prefix= but the default is to build in the source directory and to place libraries in -/// <b>/usr/local/lib</b> and include files (for building your recognizers) in <b>/usr/local/include</b>. There are also a number of antlr specific options, which you may wish to utilize. The command: -/// \verbatim -./configure --help -\endverbatim -/// -/// Will document the latest incarnations of these options in case this documentation is ever out of date. At this time the options are: -/// -/// \verbatim - --enable-debuginfo Compiles debug info into the library (default no) - --enable-64bit Turns on flags that produce 64 bit object code if - any are required (default no) -\endverbatim -/// -/// Unless you need 64 bit builds, or a change in library types, you will generally use the configure command without options: -/// -/// Here is a sample configure output: -/// -/// \verbatim -[jimi@localhost dist]$ tar zvxf libantlr3c-3.0.0-rc8.tar.gz - -libantlr3c-3.0.0-rc8/ -libantlr3c-3.0.0-rc8/antlr3config.h -libantlr3c-3.0.0-rc8/src/ -libantlr3c-3.0.0-rc8/src/antlr3stringstream.c -... -libantlr3c-3.0.0-rc8/antlr3config.h.in -\endverbatim -/// \verbatim -[jimi@localhost dist]$ cd libantlr3c-3.0.0-rc -\endverbatim -/// \verbatim -[jimi@localhost libantlr3c-3.0.0-rc8]$ ./configure - -checking for a BSD-compatible install... /usr/bin/install -c -checking whether build environment is sane... yes -checking for a thread-safe mkdir -p... /bin/mkdir -p -checking for gawk... gawk -checking whether make sets $(MAKE)... yes -checking for xlc... no -checking for aCC... no -checking for gcc... gcc -... -checking for strdup... yes -configure: creating ./config.status -config.status: creating Makefile -config.status: creating antlr3config.h -config.status: antlr3config.h is unchanged -config.status: executing depfiles commands -\endverbatim -/// -/// Having configured the library successfully, you need only make it, and install it: -/// -/// \verbatim -[jimi@localhost libantlr3c-3.0.0-rc8]$ make -\endverbatim -/// \verbatim -make all-am -make[1]: Entering directory `/home/jimi/antlrsrc/code/antlr/main/runtime/C/dist/libantlr3c-3.0.0-rc8' -/bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -Iinclude -Iinclude -O2 -MT antlr3baserecognizer.lo -MD -MP -MF .deps/antlr3baserecognizer.Tpo -c -o antlr3baserecognizer.lo `test -f 'src/antlr3baserecognizer.c' || echo './'`src/antlr3baserecognizer.c -... -gcc -shared .libs/antlr3baserecognizer.o .libs/antlr3basetree.o .libs/antlr3basetreeadaptor.o .libs/antlr3bitset.o .libs/antlr3collections.o .libs/antlr3commontoken.o .libs/antlr3commontree.o .libs/antlr3commontreeadaptor.o .libs/antlr3commontreenodestream.o .libs/antlr3cyclicdfa.o .libs/antlr3encodings.o .libs/antlr3exception.o .libs/antlr3filestream.o .libs/antlr3inputstream.o .libs/antlr3intstream.o .libs/antlr3lexer.o .libs/antlr3parser.o .libs/antlr3string.o .libs/antlr3stringstream.o .libs/antlr3tokenstream.o .libs/antlr3treeparser.o .libs/antlr3rewritestreams.o .libs/antlr3ucs2inputstream.o -Wl,-soname -Wl,libantlr3c.so -o .libs/libantlr3c.so -ar cru .libs/libantlr3c.a antlr3baserecognizer.o antlr3basetree.o antlr3basetreeadaptor.o antlr3bitset.o antlr3collections.o antlr3commontoken.o antlr3commontree.o antlr3commontreeadaptor.o antlr3commontreenodestream.o antlr3cyclicdfa.o antlr3encodings.o antlr3exception.o antlr3filestream.o antlr3inputstream.o antlr3intstream.o antlr3lexer.o antlr3parser.o antlr3string.o antlr3stringstream.o antlr3tokenstream.o antlr3treeparser.o antlr3rewritestreams.o antlr3ucs2inputstream.o -ranlib .libs/libantlr3c.a -creating libantlr3c.la - -(cd .libs && rm -f libantlr3c.la && ln -s ../libantlr3c.la libantlr3c.la) -make[1]: Leaving directory `/home/jimi/antlrsrc/code/antlr/main/runtime/C/dist/libantlr3c-3.0.0-rc8' -\endverbatim -/// \verbatim -[jimi@localhost libantlr3c-3.0.0-rc8]$ sudo make install -\endverbatim -/// \verbatim -make[1]: Entering directory `/home/jimi/antlrsrc/code/antlr/main/runtime/C/dist/libantlr3c-3.0.0-rc8' -test -z "/usr/local/lib" || /bin/mkdir -p "/usr/local/lib" - /bin/sh ./libtool --mode=install /usr/bin/install -c 'libantlr3c.la' '/usr/local/lib/libantlr3c.la' -/usr/bin/install -c .libs/libantlr3c.so /usr/local/lib/libantlr3c.so -/usr/bin/install -c .libs/libantlr3c.lai /usr/local/lib/libantlr3c.la -/usr/bin/install -c .libs/libantlr3c.a /usr/local/lib/libantlr3c.a -... - /usr/bin/install -c -m 644 'include/antlr3stringstream.h' '/usr/local/include/antlr3stringstream.h' -... - /usr/bin/install -c -m 644 'antlr3config.h' '/usr/local/include/antlr3config.h' -make[1]: Leaving directory `/home/jimi/antlrsrc/code/antlr/main/runtime/C/dist/libantlr3c-3.0.0-rc8' - -[jimi@localhost libantlr3c-3.0.0-rc8]$ -\endverbatim -/// -/// You are now ready to generate C recognizers and compile and link them with the ANTLR 3 C Runtime. -/// -/// -/// \section buildman Building Manually -/// -/// The only step that configure performs that cannot be done -/// manually (without effort) is to produce the header file -/// \c antlr3config.h, which contains typedefs of the fundamental types -/// that your local C compiler supports. The easiest way to produce -/// this file for your system, if you cannot port \b automake and \b configure -/// to the system is: -/// -/// -# Run configure on a system that does support configure -/// -# Copy the generated \c antlr3config.h file to the target system -/// -# Edit the file locally and change any types that differ on this -/// system to the target systems. There are only a few types and you should -/// find this relatively easy. -/// -/// Having produced a compatible antlr3config.h file, then you should be able to -/// compile the source files in the \c ./src subdirectory, providing an include path -/// to the location of \c antlr3config.h and the \c ./include subdirectory. Something akin -/// to: -/// \verbatim - -~/C/src: cc -c -O -I.. -I../include *.c - -\endverbatim -/// -/// Having produced the .o (or equivalent) files for the local system you can then -/// build an archive or shared library for the C runtime. -/// -/// When you wish to build and link with the C runtime, specify the path to the -/// supplied header files, and the path to the library that you built. -///
\ No newline at end of file |